HiRO H50352 V92 56K External RS-232 Data Fax Voice Modem SPK MIC Windows 11 10 8.1 8 7
The HiRO H50352 V92 56K External RS-232 Data Fax Voice Modem is a full-featured, controller-based modem that supports data rates up to V.92, data compression, error correction, fax rates up to 14.4 kbps and speakerphone mode. It also supports position independent, full-duplex speakerphone (FDSP) operation using microphone and speaker, as well as other voice/TAM applications using handset or headset.
Compatible with Windows 11
HiRO - Your Reliable Connection!!
Features and Benefits:
Windows 11 Compatible
-Fully Compatible with the latest Windows OS
Microphone and speaker interface
- Supports position independent, full-duplex speakerphone (FDSP) operation
Dual RJ-11 Phone Jack for Expansion
-Dual Jack for connecting an additional Telephone or Answering Machine
Latest V.92 Standard Protocol
-PCM Upstream - Max. Data Upload up to 48 kbps
-MOH - Receive Phone Call During Active Internet Connection
-Quick Connect - Connect to Your ISP Faster
-V.44 Compression - Allows for between 10% and 120% better compression
Tested on DELL Inspiron 3847 Windows 11
-Send/Receive Fax successfully
-Dial-Up connection connected to Netzero at 46.6 kbps
Specification:
‧ Data modem
- Quick connect, Modem-on-Hold, and PCM upstream functions (V.92 models)
- ITU-T V.92/V.90 (V.92 models), V.34 (V.92 and V.34 models), V.32bis, V.32, V.29, FastPOS (V.29), V.22 bis, V.22, V.22 Fast Connect, V.23, V.21, Bell 212A, and Bell 103
- V.250 and V.251 commands
‧ Data compression and error correction
- V.44 data compression
- V.42 bis and MNP 5 data compression
- V.42 LAPM and MNP 2-4 error correction
‧ Fax modem send and receive rates up to 14.4 kbps
- V.17, V.29, V.27 ter, and V.21 channel 2
- EIA/TIA 578 Class 1 and T.31 Class 1.0
‧ V.80 synchronous access mode supports host-controlled communication protocols with H.324 interface support
‧ Interfaces to optional external ROM/flash ROM, RAM, and/or optional serial EEPROM
‧ Data/Fax/Voice call discrimination
‧ Hardware-based modem controller
‧ Hardware-based digital signal processor (DSP)
‧ Support for many country-specific DAA configurations
- On-hook and/or off-hook Caller ID detection for selected countries
- Call progress, blacklisting
- Internal ROM includes default values for 29 countries
- Additional and modified country profile can be stored in internal SRAM
‧ Caller waiting detection
‧ Caller ID detect
- On-hook Caller ID detection
- Off-hook Call Waiting Caller ID detection during data mode in V.92, V.90, V.34, V.32bis, and V.32
‧ Distinctive ring detect
‧ Modem customization available through patch code that can be stored in optional serial EEPROM or internal SRAM
‧ Telephony/TAM
- V.253 commands
- 2-bit and 4-bit Conexant ADPCM, 8-bit linear PCM, and 4-bit IMA coding
- 8 kHz sample rate
- Concurrent DTMF, ring, and Caller ID detection
‧ Full-duplex speakerphone (FDSP) mode
- Microphone and speaker interface
- Telephone handset or headset interface
- Acoustic and line echo cancellation
- Microphone gain and muting
- Speaker volume control and muting
‧ Built-in host/DTE interface
- Parallel 16550A UART-compatible interface up to 230.4 kbps
- Serial ITU-T V.24 (EIA/TIA-232-E) logical interface up to 115.2 kbps
‧ Downloadable architecture
‧ Direct mode (serial DTE interface)
‧ Flow control and speed buffering
‧ Automatic format/speed sensing
‧ Serial async/sync data; parallel async data
**Doesn't support multi modems
**Doesn't support VoIP
**Do not connect to a docking station or hubs. Connect directly to Computer's RS-232 port.
Test Video:
HiRO H50352 Manual Installation
HiRO H50352 Netzero Dial Up Connected
HiRO H50352 Windows Fax and Scan Fax Received OK
HiRO H50352 Windows Fax and Scan Fax Sent OK
HiRO H50352 Windows Fax and Scan Setup Account
HiRO H50352 PhoneTray Pro Caller ID
HiRO H50352 PhoneTray Pro Enable TAPI mode to allow sharing the modem with other programs
